This page contains links to the most recent installers of programs utilized by the INVENTORcloud program.

3D Printer Software (current)

This 3d printer software is for any printer sold in 2017 or later years.  If your printer is older then scroll down to the legacy section at the bottom of the page.

Be sure to download the appropriate software for your printer.  If you are not certain what software to download, please contact us via our support website.

We provide installers for Slic3r for Windows operating systems.  If you have another operating system, contact us via the support system for additional directions.

Storm and CAD software

You can download StormTool below at the associated links.  Always download StormTool 3 unless you are told to do otherwise.

In addition, you can download your CAD software below.  You should download Autodesk Fusion 360 unless you have reason to use the older Autodesk 123D Design software.

3D Printer Software (legacy)

This 3d printer software is for any printer sold before 2017 (older printers).  If your printer was purchased in or after 2017 then refer to the section above for current printers.

Be sure to download the appropriate software for your printer.  If you are not certain what software to download, please contact us via our support website.

We provide installers for Slic3r for Windows operating systems.  If you have another operating system, install Slic3r from their website, download the Settings below, unzip the settings file, then Load Configuration Bundle (located in the File menu) and load in the file you unzipped.